Port Forward for Xbox One on D-LINK DSL-5300

How to configure port forwarding for Xbox One on D-LINK DSL-5300. Port Forward all the necessarry ports on D-LINK DSL-5300 for Xbox One.

How to setup Xbox One port forwarding on D-LINK DSL-5300?

1. At first, start your Xbox One.
2. Then press on the Settings and from the list choose Network.  
3. Select Advanced settings. 
4. Note down the IP address, Subnet Mask and Gateway of your console. 
5. Open D-LINK DSL-5300 admin panel, if you don't know how, check how to Open Admin Page D-LINK DSL-5300.
6. Press on More Functions. 
7. Pick Network Settings, select LAN and scroll down the page.   
8. Click on Add key. 
9. Enter the IP address and MAC address that you write down from Xbox One console.  
10. Press the OK button.  
11. Move back and again click on More Functions. 
12. Now select Security Settings and then NAT Services.  
13. Press on Add button.
14. Enter the Service name, Device name and Host IP address.   
15. From the Protocol list choose TCP/UDP.    
16. Add to Internal port: 1935 and then enter External port: 1935 and press Save key. 
17. Press on Add button once more.
18. Enter the Service name, Device name and Host IP address.  
19. From the Protocol list choose UDP.  
20. Add to Internal port: 88 and then enter External port: 88. 
21. Finally, press the Save button.
22. Repeat steps 17, 18, 19, 20 and 21 for ports: 500, 3544, 4500.
23. Perfect job! With all the ports properly forwarded you should have a better connection between Xbox One and D-LINK DSL-5300.

 

https://www.hardreset.info/